Pairing Settings; Pair Scanner With Cradle; Pair Cradle With Zigbee Router; Clear Pairing Settings - Newland NLS-HR1550-3E User Manual

**【Enter Setup】

Pairing Settings

Pair Scanner with Cradle

The scanner and cradle must be paired for communication to occur. A cradle can be paired with multiple scanners.
You need to perform this operation manually: After the scanner and cradle are powered on, insert the scanner in the
cradle and then press the "M" button on the cradle.
Note: The number of scanners allowed to pair with a cradle varies from one application to another. Consult our
technical support if you need more information.

Pair Cradle with Zigbee Router

A CD15 cradle with its DIP switch (see Fig. 1-3) in the "R" position can function as a Zigbee router. You can extend
communication distance of the cradle by pairing multiple Zigbee routers with it.
Follow the procedure below to pair a cradle with a Zigbee router: a. Pair a scanner with the cradle; b. Insert the scanner
in the Zigbee router and then press the "M" button on the router.
A CD15 cradle with its DIP switch (see Fig. 1-3) in the "C" position works a normal cradle.
Note: The number of Zigbee routers allowed to pair with a cradle varies from one application to another. Consult our
technical support if you need more information.

Clear Pairing Settings

Scanning the Undo Pairing barcode can delete all pairing information.
【Exit Setup】
【Undo Pairing】
24