Table of Contents
Advertisement
Enter Setup
Set Length Range for UCC/EAN-128
The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)】
If minimum length is set to be greater than maximum length, the scanner only decodes UCC/EAN-128
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only UCC/EAN-128 barcodes with that length are to be decoded.
Set the scanner to decode UCC/EAN-128 barcodes containing between 8 and 12 characters:
1.
Scan the Enter Setup barcode.
2.
Scan the Set the Minimum Length barcode.
3.
Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
4.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
5.
Scan the Set the Maximum Length barcode.
6.
Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
7.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
8.
Scan the Exit Setup barcode.
** Exit Setup
Set the Maximum Length (Default: 48)
102
Advertisement
Table of Contents
