Set Length Range For Micropdf417 - Newland NLS-HR1550-3E User Manual

**【Enter Setup】

Set Length Range for MicroPDF417

The scanner can be configured to only decode MicroPDF417 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Both lengths can range from 1 to 255 bytes. If minimum length is set to be greater than maximum length, the scanner
only decodes MSI-Plessey barcodes with either the minimum or maximum length. If minimum length is same as
maximum length, only MSI-Plessey barcodes with that length are to be decoded. The default minimum and maximum
lengths are 1 byte and 255 bytes respectively.
【Set the Minimum Length】
【Set the Maximum Length】
【Exit Setup】
154