Maintenance; Maintenance And Inspection Schedule - Harsco Industrial C1500H Installation & Owner's Manual

5 MAINTENANCE

5.1 M
AINTENANCE AND
This schedule applies when the boiler is in use. Verify proper operation after servicing.
improper and dangerous operation.
ATTENTION. Au moment de l'entretien des commandes, étiquetez tous les fils avant de les débrancher. Les
erreurs de câblage peuvent nuire au bon fonctionnement et être dangereuses.
the combustion chamber.
determine cause of lockout, then appropriate corrective action should be taken. If unable to determine cause of the
problem, call a qualified service technician.
AVERTISSEMENT! S'assurer que l'appareil fonctionne adéquatement une fois l'entretien terminé.
5.1.1 Daily
Observe operating temperature and general conditions. Make sure that the flow of combustion and ventilating air to
the boiler is not obstructed. Determine the cause of any service codes or lockouts on the display panel. Observe any
unusual noises or operating conditions and make the necessary corrections. Notify responsible individuals for
required corrective action or repair.
materials, including flammable vapors and liquids.
5.1.2 Weekly
Observe the conditions of the main flame. A normal high fire flame is mostly blue, while at low fire the burner will be
blue with some yellow orange.
I S
NSPECTION CHEDULE
Proper lockout/ tag out procedure must be employed when servicing this unit.
Label all wires prior to disconnection when servicing controls. Wiring errors can cause
Use care when reassembling main gas line to assure all connections are tight.
Use care when servicing boiler in order to prevent the accumulation of gas in or around
Determine the cause of any lockout or errors before resetting the boiler. If able to
Verify proper operation after operation servicing.
Check daily to be sure that the boiler area is free and clear of any combustible
47
®
MACH Gas Fired Boiler