Parking Brake Switch - Can-Am Spyder RT Operator's Manual

PRIMARY CONTROLS

7) Parking Brake Switch

The parking brake switch is located
above the glove box. It allows to en-
gage or release the electric parking
brake.
rmo2010-001-038_n
1. Parking brake switch
NOTE: To apply or release the parking
brake, the ignition key must be turned
ON.
Applying Parking Brake
With the vehicle stopped, press switch
to apply the parking brake. The brake
indicator lamp will flash.
rmo2010-001-038_b
1. Press here
NOTE: The parking brake cannot be
activated when the vehicle is above
10 km/h (6 MPH).
Check that the parking brake is fully en-
gaged. Hold the clutch (on SM5 mod-
els) and rock the vehicle back and forth.
Releasing Parking Brake
To release parking brake, press switch
until brake indicator lamp turns OFF.
______________
14
rmo2010-001-038_b
1. Press here