Can-Am Spyder RT Operator's Manual page 118

MAINTENANCE PROCEDURES
Middle Side Panel
Removal
rmo2010-008-003_a
REMOVAL SEQUENCE
1. Pull the rear of panel out of its grom-
met.
2. Slide down the top of the panel to
free panel hook.
3. Pull the bottom of the panel out of its
grommet.
4. Pull the front of the panel out of its
grommet.
5. Slide the front of the panel to re-
move it.
Installation
rmo2010-008-003_b
INSTALLATION SEQUENCE
1. Push the front of panel in its grom-
met.
2. Rotate the panel and clip it on the
support.
3. Push the bottom of the panel in its
grommet.
______________
116
4. Push the rear of the panel in its
grommet.
5. Push the top of the panel to fix the
plastic hook.
Top Side Panel
Removal
1. Open seat.
2. Open front storage compartment.
3. Remove middle side panel.
4. Remove retaining screws from
lower wind deflector.
rmr2010-038-004_a
1. Retaining screws of wind deflector
5. Remove mirror:
5.1 Pull bottom of mirror to re-
lease the locking tabs.
5.2 Slide up mirror and remove
from body.
6. Remove upper retaining screws
from top side panel.
rmr2010-038-005_a
1. Upper retaining screws
7. Remove rear retaining screw from
top side panel.