Can-Am Spyder RT Operator's Manual page 119

rmr2010-038-006_a
1. Rear retaining screw
8. Remove left service cover by re-
moving plastic rivet.
rmr2010-038-007_b
1. Left service cover
2. Plastic rivet
9. Remove front retaining screw from
top side panel.
rmr2010-038-008_a
1. Front retaining screw
10. Remove lower retaining screws of
top panel.
11. Remove top side panel by lifting it
upwards.
MAINTENANCE PROCEDURES
rmr2010-038-009_a
1. Top side panel
Installation
Reinstall top side panel in the reverse
order of the removal.
Rear Side Panel
Removal
1. Remove middle side panel.
2. Remove top side panel.
3. Remove front retaining screw of
rear side panel.
4. Remove upper retaining screw and
washer from rear side panel.
rmr2010-038-010_a
1. Front retaining screw
2. Upper retaining screw
5. Remove front plastic rivet from rear
side panel.
______________
117