Otto Bock Kimba KRUZE User Manual page 22

PIC1 PIC2
PIC3
Rain cover:
Rain cover must be used with the canopy!
Install - pull rain cover over the buggy, so the canopy, seat and also the footrest will be covered. The user must
always feel comfortable. Store always dry and clean!
Uninstall - follow chapter ―install‖, but in reverse sequence.
Comfort seat cover:
Comfort seat cover must be attached first. All positioning accessories fitted through the slots of the backrest and
seat base must be fitted afterwards!
Install - Release the rear brace and fold the buggy slightly. Put the cover on the seat. Fasten the Velcro of the cover
at the rear top of the backrest ( see PIC1). Find the appropriate position (slot) of the middle fastening strap - it must
be consistent with the line between backrest and seat base. Fasten the cover middle fastening straps at the back of
backrest ( see PIC2). Flip the seat cover over the seat edge secure by the seat straps in the space between cover and
seat. ( see PIC3). Backrest height extension must be installed after the installation of the comfort seat cover ( sizes
38, 42). To attach optional accessories, cut a hole in the artificial leather band of the seat cover, if needed.
.Uninstall - follow chapter ―install‖, but in reverse sequence.
22