Otto Bock Kimba KRUZE User Manual page 13

5-point positioning belt CLASSIC :
Install - release central buckle fasteners, connecting shoulder and lower straps. Loop both lower webbing ends to
anchoring points and fasten trough the plastic slip locks to secure its position (see PIC1).
PIC1 PIC2
Choose desired backrest belt-holes in backrest to set the proper position of the shoulders straps. Push the upper
webbing through the backrest belt-holes. Anchor the belt webbing with the plastic slip lock with labyrinth-like
fastening (see PIC2). Choose the hole in backrest to adjust the proper position of the shoulders straps. (see PIC3) .
The hole should be level with or higher than the top of the shoulders (the shoulders straps must be mounted through
backrest and backrest extension at once—size 38,42, when possible).
PIC3
Push the central buckle webbing , which is sewed on the crotch belt through the hole on the seat ( see PIC4), con-
nect all fasteners of the plastic buckle. (see PIC4).
PIC4
Uninstall - follow chapter ―install‖, but in reverse sequence.
Size adjustment - release central buckle fasteners, place the child into the buggy. Adjust the length of all straps to
desired , comfortable size.
13