Table of Contents
Advertisement
Chest Harness:
Before installing the Chest Harness, install and adjust first the 5- point positioning belt.
Install - seat the child into the buggy and determine appropriate height of chest harness, take the child out of the
buggy. Place the chest harness on the buggy in desired height and secure it by three straps with plastic side release
buckles on the rear of the backrest ( see PIC2). Unfasten the front of the chest harness by open the Velrco ( see
PIC3), put the child in the buggy and fasten the chest harness by putting the Velcro together for a fixed and secure
position of user. (see PIC4).
Uninstall - follow chapter ―install‖, but in reverse sequence.
PIC1
PIC3
Butterfly chest harness:
Install - choose desired backrest belt-holes in backrest to set the proper position of the shoulders straps (see PIC2).
Pass the upper belt through the backrest belt-holes. Anchor the belt webbing with the plastic slip lock with laby-
rinth-like fastening ( see PIC3). Loop both lower webbing ends to anchoring points (see PIC1) and fasten trough
the plastic slip locks to secure its position.
Uninstall - follow chapter ―install‖, but in reverse sequence.
Size adjustment - release buckles (PIC4), place the child into the buggy. Choose the hole in backrest to adjust the
proper position of the shoulders straps. (see PIC2) . The hole should be level with or higher than the top of the
shoulders (the shoulders straps must be mounted through backrest and backrest extension at once—size 38,42, when
possible). Adjust the length of all straps to desired , comfortable size.
PIC2
PIC4
18
Hide quick links:
Advertisement
Table of Contents
