Abduction Block - Otto Bock Kimba KRUZE User Manual

Abduction block:

Install - push the slip lock (sewed on the bottom part of the block) through the belt-hole placed on the seat base.
( see PIC1), and secure the block using the Velcro ( see PIC2).
Uninstall - follow chapter ―install‖, but in reverse sequence.
PIC1 PIC2
Foot positioners:
Install - put the lower straps through the footplate holes and fasten them underneath the footplate with the Velcro
( see PIC1). To fix the users ankles place them and put strap through metal clip around and secure it with Velcro.
( see PIC2). Make sure that the users legs are enough fixed, but not to much tighten. The user must always feel
comfortable.
Uninstall - follow chapter ―install‖, but in reverse sequence.
PIC1 PIC2
Canopy and Sunshade:
Install - place and lock the canopy/sunshade brackets into both canopy attachments on the backrest frame ( see
PIC1). Fasten side parts of the canopy upholstery with plastic clips to the chassis ( see PIC2), or unzip them and put
side parts into the net pocket. The canopy can be adjusted by pushing to the canopy frame.
Uninstall - press the canopy/sunshad fittings release and pull the canopy out of the frame brackets.
21