Test Message - Abus WIRELESS ALARM SYSTEM Installation Instructions Manual

7 7 3 3
8.1.3

Test Message

Under Test Message, you can test recorded and assigned voice announcements.
To conduct a Test message:
1. Select the Voice message menu.
2. In the Voice message menu, press
the display:
3. Conduct the test locally or by telephone as follows:
Voice message: Message test
Quick-Key
7 7 3 3 1 1
7 7 3 3 2 2
3 3
to access the Test Message menu option. You see the following on
Parameter
Send message
Under this menu option, you can transmit a test message to a previously
programmed FM number.
To send a test message:
1 1
1. Press . You see the following on the display:
2. Press or
want to send the test message. You see the following on the
display:
The ABUS alarm system calls the FM number and you hear the following test
message: "Test Message".
Local Play
Under this menu option, you can play voice messages locally over the loudspeaker of
your ABUS wireless alarm system.
To play a test message locally:
2 2
1. Press . The voice message "Test Message" is repeated for 90
seconds and the following message appears on the display:
Press any button to stop the playback.
Default
to select the
FM number to which you
Range
8-87