Abus WIRELESS ALARM SYSTEM Installation Instructions Manual page 86

Message Labels
Quick-Key
7 7 2 2 4 4
7 7 2 2 5 5
8-86
Parameter
Utility output message
NOTE:
The switch output must be defined as an FM code in order to be able to allocate a voice
message to it. See also Follow User Code.
4 4
Press . You see the following on the display:
Press or
You see the following on the display:
The option in the Choose UO menu presents the FM Code switch outputs. Select the
number of the appropriate switch output for the message selected in step 3, or select
00 if you do not want to allocate a message to the switch output.
Macro Message
5 5
Press . You see the following on the display:
Press or
The following options are available:
1 1
Press to play the macro announcement. You hear the announcement
over the system loudspeaker.
2 2
Press to record a new text. You see the following on the display:
Press and speak your message into the microphone. The counter on the
display counts down the remaining seconds until the recording time expires.
Recording stops automatically after 2 seconds. If you want to stop recording
earlier, press
Default
to select a switch output and then press
to select a macro and then press
.
Range
.
.