Abus WIRELESS ALARM SYSTEM Installation Instructions Manual page 99

EVENT MESSAGE
Foil Z=XXX
Forced P=X
Found Z=XXX
Func=XX C=YY
Home:P=X C=YY
Home:P=X WB=YY
Jamming restore
Ksw arm:P=X
Ksw disarm:P=X
L.bat rstr WB=XX
LB rstr Z=XXX
Lost Z=XXX
Low bat. WB=XX
Low bat Z=XXX
Main: bell rs
Main:AC Restore
Main:AUX restore
Main:Battery rst
Main:low AC
Main:Low battery
Main:no aux
Main:no bell
MS=X call error
MS=X restore
Next arm:P=X
Next disarm:P=X
Next home: P=X
No comm UO=X
Phone restore
Phone fail
Police KP=XX
Police main KP
Police WB=XX
RF Jamming
Remote home: P=X
Remote program
DESCRIPTION
Trouble in foil (Day) zone No. XXX
Partition X is force armed
Wireless zone found, zone No. XXX
Quick key function XX by user YY
Partition X is armed in Stay(Home) mode by user YY
Partition X is armed in Stay(Home) from key-fob YY
Wireless jamming restore
Partition X is armed by keyswitch
Partition X is disarmed by keyswitch
Low battery trouble restore from wireless key-fob XX
Low battery restore from wireless zone No. XXX
Wireless zone lost, zone No. XXX
Low battery trouble from wireless key-fob XX
Low battery trouble from wireless zone No. XXX
Bell trouble restore
AC power restore to the system
Restore of Aux power
System low battery trouble restore
Loss of AC power from the system
System low battery trouble from the WisDom
Failure in the system's Aux power
Bell trouble
Communication fail trouble to MS phone No. X
Communication fail trouble restore to MS phone No. X
Partition X armed in Next Arm(Away) mode
Partition X disarmed in Next Disarm mode
Partition X armed in Next Stay(Home) mode
Communication failure with X10 expander ID=X
Phone line trouble restore
If the phone line is cut or the DC level is under 3V
Police (panic) alarm from wireless keypad XX (keys 1 & 2)
Police (panic) alarm from the WisDom keys
Police (panic) alarm from key-fob XX
Wireless system jamming
Partition X armed in Stay(Home) mode from the UD software
The system has been programmed from the UD software
11-99