Abus WIRELESS ALARM SYSTEM Installation Instructions Manual page 50

Editing
Quick-Key
2 2 4 4 1 1
2 2 4 4 2 2
2 2 4 4 3 3
2 2 4 4 4 4
7-50
Parameter
Copy to a zone
Copies all settings programmed for a zone (except the zone name).
1 1
1. Press . You see the following on the display:
2. Press the number buttons 1 to 9 to select the zone you want to copy and press
or
which you want to copy.
The procedure is confirmed with a beep if successful.
3. Press to exit the menu option.
Delete a Zone
Deletes a zone. The zone is not completed deleted, but its zone type is set to "not
used". The zone settings are retained.
2 2
1. Press .
2. Press or
to delete.
3. Press to switch between [Y] YES and [N] NO and press
confirm.
4. Press to exit the menu.
Add/Copy Partition
Copies a partition to another partition.
3 3
1.
Press .
2.
Press the number buttons 1 to 3 to select the area you want to copy and press
or
select the area to which you want to copy.
The procedure is confirmed with a beep if successful.
3. Press to exit the menu option.
Delete a partition
Deletes a selected partition. All zones assigned to this partition are also deleted.
4 4
1. Press .
2. Press the cursor keys to select the area you want to delete.
3. Press to switch between [Y] YES and [N] NO and press
4. Press to exit the program.
to move the cursor. Press 1 to 9 again to select the zone to
or the number buttons 1 to 9 to select the zone you want
to move the cursor. Press the number buttons 1 to 3 again to
to
.