Keypads; Allocation; Communication Test - Abus WIRELESS ALARM SYSTEM Installation Instructions Manual

8 8
7.8

Keypads

Under Keypads, you can assign two operating panels to the ABUS wireless alarm system. The following is an overview of the menu
options according to their sequence in the Keypads menu:
8 8 1 1
Allocation, page 7-77
8 8 2 2
Communication test, page 7-77
To access the Keypads menu:
•
In the installer menu, select
Press
You are now in the operating panels menu and can access the submenus as described in the following
section.
8 8 1 1
7.8.1

Allocation

Here you can train a new wireless keypad for your system.
To access the Keypads allocation menu:
1. Select the Keypads menu.
2. Under Keypads, press
3. On the alarm system keypad, select the number of the wireless operating panel you want to train and press
.
4. The following three menu options are available:
•
Press
•
Press
activation button on the keypad twice. When you press a button, you hear a short beep in
confirmation, and the send LED light up briefly.
When your ABUS wireless alarm system has successfully trained the keypad panel, the wireless
alarm system confirms this with a short beep.
•
Press
5. Repeat steps 2–4 to train further wireless keypads.
7-74
8 8
or press
. You see the following on the display:
1 1
to access the Allocation menu option. You see the following on the display:
1 1
to train the next wireless keypads.
2 2
to train a keypad. Send a learn signal from your wireless keypad by pressing the
3 3
to delete wireless keypads. Press
to confirm.
or to access the corresponding menu option.
to select either [Y] or [N], and then press