Chapter 9 Accessories For Your Abus Wireless Alarm System - Abus WIRELESS ALARM SYSTEM Installation Instructions Manual

Wireless alarm system
Hide thumbs Also See for WIRELESS ALARM SYSTEM:
Table of Contents

Advertisement

Chapter 9 Accessories for your ABUS wireless alarm system

The following is a list of accessories for your ABUS wireless alarm system.
Wireless motion detector
The wireless motion detector is used for protecting entire rooms. With its infrared element, it can monitor an area of 15 x 15m with an
angle of vision of 90°.
Pet-immune wireless motion detector
The pet-immune wireless motion detector, like the normal wireless motion detector, is used for protecting entire rooms. In contrast to
the standard model, the pet-immune detector does not trigger an alarm for dogs up to 30kg, cats, and smaller pets.
Wireless water detector
The wireless water detector detects water that has escaped from washing machines and drains and thus prevents even greater
damage. The water detector has a 2m cable that allows it to be installed flexibly.
Wireless vibration detector
The wireless vibration detector monitors windows and walls for strong vibrations, caused for example by attempts to lever a window
out. It can also protect safes against drilling.
Wireless opening contact detector
The wireless opening contact monitors windows and doors for unauthorised opening. The small, compact design of the magnet allows
it to be used almost anywhere.
4-button wireless remote control
The 4-button wireless remote control is used for activating and deactivating your wireless alarm system. The other 2 buttons can be
freely programmed, for example to trigger a panic alarm, activate a switch output, or activate the system internally. You can use up to
eight 4-button wireless remote controls.
Wireless key pad
The wireless key pad is also used for activating and deactivating your wireless alarm system. You can also trigger panic and fire
alarms, and make a medical emergency call. You can use up to two wireless key pads.
Wireless key switch
The wireless key switch is installed externally and is used for activating and deactivating your wireless alarm system with a key.
Internal wireless sounder
The internal wireless sounder alerts the occupants of the house to burglary and fire with a very loud signal. Its very loud tone also
causes a high stress potential in the intruder, who then normally abandons the object as fast as possible.
External wireless sounder
The external wireless sounder triggers a loud alarm on burglary or fire and thus alerts the local neighbourhood. It also deters potential
burglars in advance. Its strobe light can guide security personnel reliably to the scene of the crime, especially at night.
9-90

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fu9010

Table of Contents