Arecont Vision MegaBall 2 Installation Manual Package Contents MegaBall™ 2 Wall Mount Version (-W) A. Arecont Vision MegaBall™ 2 camera with wall mount (indoor use only) B. Mounting template C. CD with AV100 software and user manuals (license key required for recording) D.
3 Year Limited Warranty ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free from material defects in material and workmanship for a period of thirty-six (36) months from the date of shipment (the “Warranty Period”);...
® Arecont Vision MegaBall 2 Installation Manual Install MegaBall™ 2 Wall Mount Camera (-W Models) Mounting the Camera: Adjusting the Tilt, Pan, Z-Axis (yaw): 1. Remove the camera and hardware from the box. 6. To adjust the camera tilt, pan or z-axis (yaw), 2.
Install MegaBall™ 2 Dome Version (-D Models) Mounting the Camera: 5. Using the provided Security L-key (Image 1F), loosen the three (3) screws securing 1. Remove the camera and hardware from the the dome cover (Image 6). Remove the box. vandal resistant dome cover.
Page 8
® Arecont Vision MegaBall 2 Installation Manual In-ceiling Mount Installation (Optional) 7. Using the mounting template, cut a hole in the surface for mounting. Adjusting the Tilt, Pan, Z-Axis (Yaw): 8. Insert the in-ceiling mount camera into the 12. To adjust the camera tilt, pan or z-axis hole.
Page 9
® Arecont Vision MegaBall 2 Installation Manual Adjusting focus on Panomorph lens (DN-01 models only) Focus Ring 13. Loosen two set screws on focus ring by provided security L-key (Image 1-2F on Page 4) as shown in image 11 Image 13...
Page 10
® Arecont Vision MegaBall 2 Installation Manual 19. Run the Immervision demo viewer. (Image 17, found on the CD). Lens Image 17 Image 15 20. Choose Arecont from camera list as shown in image 18. NOTE: To get properly dewarping image from ®...
Page 11
® Arecont Vision MegaBall 2 Installation Manual 22. Choose camera installation method as shown in image 20. Camera installed on wall Camera installed on ceiling 360° view Camera installed on table 180° view Image 20 Page | 11 support@arecontvision.com...
Page 12
® Arecont Vision MegaBall 2 Installation Manual NOTE: Arecont Vision AV5245DN-01 models use Immervision A8TRT Panomorph lens and can be dewarped by Arecont Vision certified video management systems as shown in Table 1 Video Management Systems Version Corporate 6.1 Enterprise 8.5e Professional 8.5e...
Page 13
Dome Cover (Bubble) Installation Adjusting the Remote Focus and Zoom: (Optional): (PM models only) 23. Remove the O-ring (Image 1D on Page 4) 27. To adjust focus or zoom, open the camera web interface and click the “Focus” tab as from the bezel by pushing on the 4 drift pins on the back of bezel shown in Image 21.
Page 14
® Arecont Vision MegaBall 2 Installation Manual Image 23 Adjusting P-Iris: ( PM models only) Note: If “Enable P-Iris” is unchecked, the iris will be fully open to the maximum. It may result in less sharpness and artificial color under strong light condition.
® Arecont Vision MegaBall 2 Installation Manual Optional: Connecting Alarm I/O: Software Installation 34. To use the Alarm I/O, connect the alarm I/O to the pigtail cable connector as shown in 35. Install the AV100 or AV200 application Image 2.
Wall Mount (D4S-WMT-B or D4S-WMT) Installation Instructions (Sold Separately) Inside the box: A. Wall mount ( Fits ¾” NPT Standard) B. Pack of three (3) machine screws C. Pack of four (4) screws and four (4) anchors NOTE: Anchors and screws are good to be used for concrete, wall block and red bricks.
Junction Box Adapter (SV-JBA) Installation Instruction (Sold Separately) Inside the box: A. Junction Box Adapter B. Pack of four (4) machine screws C. One double-sided hex key D. Pack of four (4) screws and four (4) anchors NOTE: Anchors and screws are good to be used for concrete, wall block and red bricks.
Electrical Box Adapter (SV-EBA) Installation Instructions (Sold Separately) Inside the box: A. Electrical Box Adapter B. Pack of four (4) machine screws Image 32-1 Single gang box D4S-WMT Bracket holes Image 31 Image 32-2 Double gang box Not included but needed: ...
® Arecont Vision MegaBall 2 Installation Manual LED Indicators Status Description Green Flashing Camera has been accessed. Normal operation. Solid None No Connection. Page | 19 support@arecontvision.com...
Swap the “troubled” camera with a known good camera to see if the problem follows the camera or stays at the location. 3. Contact Arecont Vision Technical Support one of three ways: 1. Online Portal : Support.ArecontVision.com 2. Phone : 1.818.937.0700 (option #1) 3.