Schedule - Beward N6603 User Manual

Effective period: allows you to set a period when the alarm output can be activated. The
following options are available:
 Always: the alarm output can be activated any time.
 Schedule: select this option for the scheduled activation. To configure this option, click
the [Schedule] button or go to SETTING – Advanced – Schedule. See paragraph 7.6
for details.
NOTE:
The alarm output is being active during the period specified in the [Alarm duration] item after an alarm
event occurred.

7.6. Schedule

This section allows you to specify a schedule for the functions mentioned before. You can
specify a schedule for each day of the week or apply it for a whole week by checking the [Use the
same time schedule every day] box (Pic. 7.18).
Schedule selection: allows you to specify a schedule for a certain event. The following
events are available: [FTP – Alarm], [FTP – Periodical], [E-mail (SMTP) – Alarm], [E-mail
(SMTP) – Periodical], [HTTP event – Alarm], [Alarm output – Alarm], [Alarm output – Timer],
[Record – Alarm], [Record – Periodical], [IR schedule].
Start time, End time: allows you to specify a time interval. The first field is for selecting an
hour (00 to 23/24); the second field is for selecting a minute (00 to 55 in increments of 5).
Days of the week area: the following options are available for each day of the week:
 Time interval: this is a drop-down list containing time intervals that were specified for
each day of the week. If no interval is specified, the drop-down list will be empty.
N6603 Operations User Manual
Pic. 7.18
Chapter 7. SETTING: Advanced
72