Table of Contents
Advertisement
Trigger Every Other: specify a time interval in hours and minutes. The action will be
repeated by the end of this interval.
11.2.1.6. On boot
On boot: the action is executed when the camera is loaded after turning on. By selecting
this event type you can notice the number of camera reboots.
11.2.1.7. Capacity Warning
[Capacity Warning] event is very useful when data record to a memory card without
overwriting. The action is executed when a free space on a memory card is nearly over (Pic.
11.34). The volume of the free space can be specified in SETTING – Event – Event Server – SD
Card (see paragraph 11.1.2)
NOTE:
To activate this event type you need to put a memory card in the slot.
Please Configure SD Card: a link which allows you to open memory card configuration
window.
11.2.1.8. Network Link Down
Network Link Down: the action is executed in case of some network link failure, in other
words, when connection is lost. It allows you to get a notification when the connection will be
reestablished and, that is more important, to save video data recorded by your camera by
activating memory card recording. After the connection will be reestablished you can resave these
data to your computer or view it using a built-in player (please, see paragraph 10.3).
11.2.1.9. IP-notification
IP-notification: the action is executed if the camera's IP address changes (the type of
connection changes) (Pic. 11.35).
DHCP: an action is executed when IP address is changed by DHCP server.
Static IP: an action is executed when a static IP address or the type of connection
is changed by a user.
N300 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.34
90
Advertisement
Table of Contents
