Accessing The Ip Camera; Installing "Beward Ip Installer" Software; Accessing The Ip Camera Using "Beward Ip Installer" Software - Beward N 1000 Installation & User Manual

Built-in multi-zone motion detector

Hide thumbs Also See for N 1000:

Table of Contents

Click the [OK] button to save the changes.

5.3. Accessing the IP Camera

There are three ways to access this IP camera:

 Using "BEWARD IP Installer" software;

 Using the [Network] menu in Windows 7;

 Using Internet Explorer browser.

IMPORTANT!

When connecting the camera, take notice that the camera's default IP address is 192.168.0.99.

Insert the supplied CD into your CD-ROM drive. You will see the installation menu (Pic.

5.19).

To start the installation, select "BEWARD IP Installer" and follow the instructions of the

installation wizard until the installation ends.

IMPORTANT!

To access the IP camera using "BEWARD IP Installer" software, you need to enable UPnP for both your

computer and the IP camera. UPnP is enabled by default in Windows 7.

N1000 Installation User Manual

Chapter 5. Setting Up the Wired Connection for Windows 7

Pic. 5.19

Table of Contents