Setting Lp 40 Board Switches And Mounting Optional Boards; Figure 3.4 Mounting Optional Board; Figure 3.5 Setting Switches Of A Rcm Board - Samsung OfficeServ 7400 Installation Manual

4) Align the connectors and holes of the MP40 board to that of the optional boards
(Modem), and firmly press the optional boards downward with two hands.

3.2.2 Setting LP 40 Board Switches and Mounting Optional Boards

The LP40 board is Equipped with various optional boards(SCM, MFM, MIS, RCM, RCM2,
CRM) in according to user's purpose and system configuration. Mount optional boards as
follows:
1) Check the exterior of the optional board for any damages.
2) Mount optional boards(RCM, RCM2) with switch setup after setting the switch
depending on the system configuration.
© SAMSUNG Electronics Co., Ltd.

Figure 3.4 Mounting Optional Board

CID R2
S1

Figure 3.5 Setting Switches of a RCM Board

OfficeServ 7400 Installation Manual
MODEM
3-5