Figure 3.6 Setting Switches Of A Rcm2 Board; Figure 3.7 Mounting An Optional Board To The Lp40 Board; Table 3.4 Switches Of Rcm/Rcm2 Board - Samsung OfficeServ 7400 Installation Manual

CHAPTER 3. Ошибка! Стиль не определен.
Switch
S1 According to the selection of R2/CID in the switch(S1), R2 or CID function can be
switched.
R2
CID
3) To mount optional boards to the LP40 board, check the available positions and the
numbers of the mountable boards as shown in following table. Align the connectors of
the optional board to that of the board to mount the optional board, and firmly press
the optional board downward with two hands.
3-6
CID R2
S1

Figure 3.6 Setting Switches of a RCM2 Board

Table 3.4 Switches of RCM/RCM2 Board

R2(R2 Signaling): 30-channel
CID(Caller ID): Receiver 14-channel(default state)
LOC2
LOC3

Figure 3.7 Mounting an Optional Board to the LP40 Board

Description
LOC1
© SAMSUNG Electronics Co., Ltd.