Figure 7.18 Rj-45 Port Of 8Hyb Board (For Door Phone); Figure 7.19 Rj-45 Port Of 8Hyb2 Board (For Door Phone) - Samsung OfficeServ 7400 Installation Manual

CHAPTER 7. Ошибка! Стиль не определен.
Connecting to a 8HYB Board
Pin No. 1
Function -
Connecting to a 8HYB2 Board
Pin No. 1
Function -
2) Connect the Door Box port of the DPIM to the Line port of the door phone.
3) When using an automatic door lock, connect the Lock port of the DPIM and the door
phone contact point to the door lock.
The door lock contact point is designed to control low-voltage relay and uses 24 VDC
and 100 mA. MMC
MMC Related
MMC 211 is used to assign call numbers to door phones
For detailed information on the program, refer to 'OfficeServ 7400 Programming
Manual' in e-manual site(http://www.samsungdocs.co.kr) of SAMSUNG Electronics Co.,
Ltd.
7-12

Figure 7.18 RJ-45 Port of 8HYB board (for door phone)

2 3
- -

Figure 7.19 RJ-45 Port of 8HYB2 Board (for door phone)

2 3
- -
P1-P8 Ports
4 5 6
- - -
P9-P16 Ports
4 5 6
DLI DLI -
TIP RING
© SAMSUNG Electronics Co., Ltd.
7 8
DLI TIP DLI
RING
7 8
- -