Figure 3.9 Inserting The Control Board To A Connector Of The Main Board - Samsung OfficeServ 7400 Installation Manual

CHAPTER 3. Ошибка! Стиль не определен.
2) Align the MP40 board to the guardrail of slot 3 of the basic cabinet, and slide the
MP40 board into the slot.
3) Push the front panel lever of the MP40 board until the board is completely inserted
into the connector of the OfficeServ 7400 main board.

Figure 3.9 Inserting the Control Board to a connector of the Main Board

4) Align the LP40 board to the guardrail of slot 0 of the basic cabinet, and slide the LP40
board into the slot.
3-8
Figure 3.8 Mounting the Control Board to Slot 0
Figure 3.10 Mounting the Control Board on Slot 0
© SAMSUNG Electronics Co., Ltd.