Figure A-3 Serial Port Configuration Window - NEC Electra Elite IPK Installation And Maintenance Manual

Document Revision 1
___________________________________________________________________________________
File Name
This is the file name that the SPE(M)-U( ) ETU uses for the firmware upgrade.
Submit Button
This is used to submit the changes to the working memory of the SPE(M)-U( ) ETU.
When any of the above listed items are changed the Submit button must be used in
order for the changes to become active.
S 3 S
ECTION ERIAL
The Serial Port Configuration screen is used to configure the individual COM ports on
the front of the SPE(M)-U( ) ETU to work with the appropriate connections that will be
made. This screen allows each of the four COM ports to be configured for the
appropriate speed, parity, data, and stop bits.
___________________________________________________________________________________
A - 4
P C
ORT ONFIGURATION

Figure A-3 Serial Port Configuration Window

S
CREEN
Web-Based Setup and Configuration
Electra Elite IPK