Figure C-1 Web Browser Login Screen - NEC Electra Elite IPK Installation And Maintenance Manual

Document Revision 1
___________________________________________________________________________________
Some Application boards have stand-alone, independent serial ports that enable
users to make configuration changes, run diagnostic tests, etc. Details for the COM
ports on these boards are shown in
___________________________________________________________________________________
C - 2
Laptop PC
SPE Application
CoSession for Windows
(COM4)
Hyper Terminal (COM 50)
Hyper Terminal (COM 51)
SAT (COM 54)
One connection is
established to the SPE
ETU via the Ethernet.
COM Port 4 used to program the Voice Mail.
The cables used from the SPE(M)-U( ) ETU to the other
devices are special cables that will be provided with the SPE
ETU. (Only one cable is provided, additional cables can be
purchased separately.)

Figure C-1 Web Browser Login Screen

The SPE Application must be launched prior to the other applications and a connection
must be established. Once the applications are launched, proceed to connect as if the
PC was connected directly to the cards.
Customer's LAN/WAN
COM Port 50 is used to monitor
the PRT card.
COM Port 51 is used to monitor the
CCH card.
Table C-1 Comparison of
Electra Elite IPK
ETUs.
Configuration Examples and MISC