B&D Easylifter Instructions Manual page 6

ONE-PIECE DOOR INSTALLATIONS
• Generally, a one-piece door does not require
reinforcement. If your door is lightweight, you can
refer to the information relating to sectional doors
in Installation Step 11.
• Depending on your door's construction, you may
need additional mounting hardware for the door
bracket (Step 11).
One-Piece Door without Track
Header
Wal l
Safety Reversing Sensor
One-Piece Door with Track
Gap between floor
and bottom of door
Saf ety must not ex ceed 6mm.
Rev ersing Sensor
Gap between floor and bottom
of door must not exceed 6mm
Acce ss
Door
Saf ety
Rev ersing Sensor
• The gap between the bottom of the garage door
and the floor cannot exceed 6mm. Otherwise, the
safety reverse system may not work properly. See
Adjustment Step 3. The floor or the door should be
repaired.
Acce ss Door
Saf ety
Rev ersing
Sen sor
Header
Wal l
CLOSED POSITION
Header Sleeve Br acket
Header
Wal l
Header
Curved
Bracket
Door Ar m
Door
Gar age
Bracket
Door
5
CLOSED POSITION
Header
Sleeve Br acket
Header
Bracket
Rail
Door Bracket
Straight Curved
Door Door
Arm Arm
Gar age
Door
CLOSED POSITION
Tro lley
R
Emergenc y
Release
Rop e & Handle
Straight
Door
Arm
Trolley
Chain
Emergenc y
Release
Rop e &
Handle
l i a