Table of Contents
Advertisement
Quick Links
Econolift
Econolift
™
ROLLING GARAGE DOOR OPENER
RDO-2 v1EL EconoLift
WARNING
AUTOMATIC ROLLING GARAGE DOOR OPENER
It is vital for the safety of persons to follow all
Installation Instructions
instructions. Failure to comply with the installation
instructions and the safety warnings may result in
serious personal injury and/or property and remote
OWNERS COPY
control opener damage.
Please save these instructions for future reference.
Advertisement
Table of Contents
Related Manuals for B&D EconoLift
Summary of Contents for B&D EconoLift
- Page 1 Econolift Econolift ™ ROLLING GARAGE DOOR OPENER RDO-2 v1EL EconoLift WARNING AUTOMATIC ROLLING GARAGE DOOR OPENER It is vital for the safety of persons to follow all Installation Instructions instructions. Failure to comply with the installation instructions and the safety warnings may result in...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Warnings............Product Features............Operating Controls............Package Contents............Side Room Requirements..........Fixing Weight Bar............. Fitting Locking Bar Covers .......... Mounting The Opener..........Fixing Curtain To Drum........... Setting Limits Via Control Panel........ Setting Limits Via Transmitter........Setting Obstruction Force Margin......Re-Calculating Force Margin Sensitivity.... - Page 3 IMPORTANT SAFETY INSTRUCTIONS Warning - It is vital for the safety of persons to follow all instructions. Failure to comply with the following Safety Rules may result in serious personal injury and/or property damage. ADDITIONAL SAFETY protection The unit is rated to IP24, however, it should be installed STRONGLY recommend the fitting of a Photo Electric so that it is protected from the elements.
- Page 4 SECURITY CODE STORE initialisation of the automatic door string handle, then releasing. This will The EconoLift Garage Door Opener opener. The door will also stop if allow you to manually open or close the uses state of the art technology in restricted whilst opening.
-
Page 5: Operating Controls
OPERATING CONTROLS P. E. SHUNT. The shunt has to be OPERATE button (blue) is used OPEN LIMIT LED (green) the removed when connecting a Photo during installation to test the open, very helpful during Electric Beam. stop and close cycles for the installation. - Page 6 OPERATING CONTROLS P.E. BEAM INPUT FORCE MARGIN SET BUTTON DOOR STATUS LED (YELLOW) PLUS BUTTON (FOR LIMITS SETTING & FORCE MARGIN) DATUM ADJUST SCREW OPEN LIMIT LED (GREEN) DOOR CODE BUTTON (BLACK) MINUS BUTTON (FOR LIMITS SETTING & FORCE MARGIN) CODING LED (RED) CLOSE LIMIT LED (RED) SET BUTTON (ORANGE)
-
Page 7: Package Contents
PACKAGE CONTENTS ITEM QUANTITY RDO-2 ECONOLIFT DRIVE UNIT HAND HELD TRANSMITTER WEIGHT BAR (NOT INCLUDED IN SOME MODELS) PAN HEAD SCREW M4x50mm (NOT INCLUDED IN SOME MODELS) NILOCK HEX NUT M4 (NOT INCLUDED IN SOME MODELS) FLAT WASHER I.D 3/16 x 1/2 (NOT INCLUDED IN SOME MODELS) -
Page 8: Side Room Requirements
40mm. However, for easier access it is recommended that at least 95mm is allowed . 1. CHECK OPERATION OF DOOR BEFORE BEGINNING THE INSTALLATION OF THE ECONOLIFT AUTOMATIC OPENER CHECK THE OPERATION OF THE DOOR. The door must be well balanced and be in a reasonable MINIMUM RECOMMENDED operating condition. -
Page 9: Mounting The Opener
MOUNTING THE OPENER 4. FIXING DRIVE UNIT TO THE DOOR FIG. 4 The B&D Drive Assembly can be fixed to the roll up garage door in a variety of ways. Described below is one method of fixing. Make sure there is enough side room to slide the drive assembly onto shaft. -
Page 10: Fixing Curtain To Drum
SETTING LIMITS 5. FIXING OF DOOR CURTAIN TO DRUM FIG. 7 DRUM WHEEL WHEEL The door curtain has to be secured to the drum wheel with suitable fasteners. 1. With the door in the fully closed position, mark the curtain (Fig. - Page 11 SETTING LIMITS 6.2 SETTING TRAVEL LIMITS FIG. 10 NOTE: The opener is factory preset for installation on the RIGHT HAND SIDE. When the opener is mounted on the left side of the door the opener will travel in reverse. 1. Press Minus (-) button, the door will start closing. If the door starts to open - press the Operate button (Fig.
- Page 12 ADJUSTING SAFETY OBSTRUCTION FORCE The Safety Obstruction Force is calculated automatically and set in memory on the EconoLift. It is usually not necessary to adjust the Safety Obstruction Force. The only time the force may need to be increased is due to environmental conditions, for example, windy or dusty areas, and areas with extreme temperature changes.
-
Page 13: Coding Transmitters
CODING TRANSMITTERS 9. SETTING TRANSMITTERS CODES FIG. 13 Make sure to insert the battery into the transmitter. The memory in the openers receiver can store up to six smart code remote control transmitters, one dipswitch transmitter and one entry keypad. 10.1 STORING THE TRANSMITTERS CODE Press and hold 1. - Page 14 PE BEAM AND FINAL SET UP 13. FITTING THE SAFETY PHOTO FIG. 14 ELECTRIC BEAM SENSOR (OPTIONAL) Locate the Photo Electric Beam (P.E.) normally closed contact type in a strategic location within doorway. We recommend 150mm above the floor level and as close as possible to the door opening, inside the garage.
-
Page 15: Door Status Indicators
PARAMETERS DOOR STATUS INDICATORS OPEN LED CLOSE LED DOOR STATUS DOOR OPENER STATE BEEPER GREEN LED YELLOW OPEN CLOSE FLASHING OPENING FLASHING CLOSING DOOR TRAVEL STOPPED FLASHING FLASHING DOOR OBSTRUCTED WHEN OPENING FLASHING BEEPS WHILE DOOR OBSTRUCTED WHEN CLOSING FLASHING DOOR IS MOVING ALTERNATING ALTERNATING... -
Page 16: Factory Default Settings
Note: 1. The maximum continuos curtain residential roll up door opening that the EconoLift can be installed on is 5500mm wide by 2700mm high. The door must be well balanced. A person of average strength should be able to lift up the door manually with very little effort in case of an emergency. -
Page 17: Trouble Shooting Guide
TROUBLE SHOOTING SYMPTOM POSSIBLE CAUSE REMEDY Switch on mains power. Door will not operate. Mains power not switched on. Remove obstruction. Door is obstructed. Unlock door or remove jam. Door is locked or motor jammed. Door requires service/repair by qualified Door tracks/hardware damaged. -
Page 18: Parts List
SPARE PARTS LIST ©Copyright 2006 B&D Doors... - Page 19 B&D Australia (an Australian company). ‘Purchaser’ means the purchaser of the Opener. ‘Opener’ means the ‘EconoLift Automatic Garage Door Opener’ ‘Manufacturer’s Written Instruction Manual’ means the instruction manual provided with the Opener. 2. This warranty applies to every sale of an Opener to a Purchaser and is the only warranty given on behalf of B&D.
-
Page 20: Warranty
WARRANTY AND EXCLUSION OF LIABILITY 10. Subject to Clause 12 hereof, this warranty does not extend to and B&D will be relieved of all obligations, responsibilities and liabilities (direct or consequential) in the event that defects in manufacture of the Opener are directly or indirectly in the opinion of B&D due to or result from: (i) being fitted to any door or other closing device which is not of the type or condition defined in the Manufacturers Written Instruction Manual as suitable for installation of the Opener.