Preparation Before Starting Work; Set Up And Connect; Typical Electrostatic Spraying System - WAGNER GA 2800EA Operating Manual

EDITION 12/2008
OPERATING MANUAL
5

PREPARATION BEFORE STARTING WORK

5.1

SET UP AND CONNECT

5.1.1

TYPICAL ELECTROSTATIC SPRAYING SYSTEM

Incorrect installation/operation!
Risk of injury and damage to equipment
SIHI_0050_GB
A Spraying booth
B Object
C Conveyor
D Control cabinet
E Movement device system
F Electrostatic automatic air spray gun
PART NO. DOC350731
WARNING
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the addi-
tionally required system components.
GA 2800EA, GA 2805EA
The spray gun GM 2800EA or GA 2805EA
must be used a part of an air electrostat-
ic spraying system. The spraying system
shown in the fi gure is only one example
of an electrostatic air spraying system.
It is not an actual system design. Con-
tact your WAGNER distributor for assist-
ance in designing a system to meet your
needs. The operating instructions and
the safety regulations for the additional
system components used must be read
before starting-up.
20