Electrode Replacement - WAGNER GA 2800EA Operating Manual

EDITION 12/2008
OPERATING MANUAL
8.4

ELECTRODE REPLACEMENT

Electrode
If the electrode is damaged (bent or broken) by incorrect handling, the valve needle head
(12) must be replaced.
1. Remove valve rod as described in paragraph 8.2.
2. Carefully clamp the valve rod extension (11) and pull off the needle head (12) using
small pliers.
3. Manually press the new needle head (12) onto the resistor housing (13).
Note
For easier assembly fi t the valve needle with the electrode pressed into a cork.
4. Refi t valve rod as described in paragraph 8.2.
14
12
13
15
15
PART NO. DOC350731
(15)
11
GA 2800EA, GA 2805EA
B_00141
37