Table of Contents
Advertisement
EDITION 12/2008
OPERATING MANUAL
8
REPAIR WORK
Incorrect maintenance/repair!
Danger to life and equipment damage
SIHI_0048_GB
8.1
REPLACING THE VALUE SEAT
1. Remove
nozzle
paragraph 5.4.3 or 5.4.5.
2. Use nozzle key 2800 (I) to unscrew
valve seat. Replace, and tighten
carefully.
3. Reassemble nozzle in reverse
order.
PART NO. DOC350731
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the chapter "Spare
parts catalog".
Before all work on the unit and in the event of work interrup-
tions:
- Disconnect the control unit from the mains.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
according
to
WARNING
Flat jet nozzle
Round jet nozzle
G
I
GA 2800EA, GA 2805EA
B_00174
34
Advertisement
Table of Contents
