EDITION 12/2008
OPERATING MANUAL
4
DESCRIPTION
4.1
AREA OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS
The electrostatic spray guns can only be used with the control units designed for that pur-
pose:
Part No.
Description
381021
Control unit EPG 3000
381022
Control unit EPG 3000 USA
381020
Control unit EPG 3000
350015
Control module HVM 2082
350017
Pneumatic module PPM 2000 S
350023
Pneumatic module PPM 2000 S-2
4.1.1
WHAT KIND OF SPRAYING MATERIAL CAN BE APPLIED
➞ Paints containing solvents of the explosion class II A.
➞ Enamels, primers, textured paints etc., which have a specifi c resistance of > 50 kΩ
(according to the WAGNER or Ransburg scale).
➞ The effectiveness of the spraying action is always dependant on the composition of
the paint being used, e.g. pigments or resin.
Note
With very highly conductive materials or those with a very high electrical resistance, the
electrostatic effect does not work as effi ciently. The relationship between the values of the
high-voltage (kV) and the current (µA), shown on the HVM 2082, denotes the charging
capacity of a spray material.
➞ High kV value, low µA value (no wrap around) = Paint with too high el. resistance.
➞ Low kV value, high µA value (no wrap-around) = Paint with too low el. resistance
In the event of application problems, contact your WAGNER branch and the paint manu-
facturer.
PART NO. DOC350731
Operating mode
Single control unit
Single control unit
Modular painting system
In control cabinet operation:
GA 2800EA, GA 2805EA
14