Naming the Policy Master cluster
You must specify a unique name to identify the Policy Master cluster.
To name the Policy Master cluster
◆
At the cluster name prompt, enter a unique name for the Policy Master
cluster. For example, enter the following: my_cluster.
Creating an ID for the Policy Master cluster
If you install the Policy Master on more than one system, you must create an ID
for the Policy Master cluster.
To create an ID for the Policy Master cluster
◆
At the cluster ID prompt, enter a unique ID between 0-65535. For example,
enter the following: 65000
Configuring the heartbeat settings
If you install the Policy Master on more than one system, you must designate at
least one NIC for a private heartbeat link. A private heartbeat link is a link that
sends status information between systems within the Policy Master cluster.
Private heartbeats are generated every half second.
You can optionally designate a NIC for a low-priority heartbeat link. Low
priority heartbeats are generated every second and do not send status
information. If none of the high-priority links work, low-priority links are
automatically promoted to high-priority links.
To configure the heartbeat settings
1
At the first heartbeat prompt, enter the NIC for the first private heartbeat
link on your VCS One cluster. For example, enter the following:
■
(On Linux) eth0
■
(On Solaris x64) bge0
Type y to confirm the NIC entry.
2
At the second heartbeat prompt, specify if you want to configure a second
private heartbeat link. Type y or n.
3
If you configure a second private heartbeat, enter the NIC. For example,
enter the following:
(On Linux) eth1
■
■
(On Solaris x64) bge1
Type y to confirm the NIC entry.
Installing and configuring the VCS One Policy Master
Configuring the Policy Master
45