Specifying The Target System - Symantec XGS-4728F Installation Manual

To launch the VCS One installer
1
2
3
4
5
6
7

Specifying the target system

You must specify the name of the target system for each Policy Master system.
To specify the target system
1
2
Log on as root on one of the Policy Master cluster systems.
On the VCS One software disc, change directories to the platform-specific
directory. Enter the following:
#
cd platform
where platform is the platform-specific directory, such as RHEL5_x86_64
or sol_sparc.
On the software disc, start the installer script. Enter the following:
#
./installer
From the Task menu, select the following task:
Install/Upgrade a Product
From the list of products, select Veritas Cluster Server One by
Symantec - Policy Master
Accept the End User License Agreement (EULA). At the EULA prompt, enter
the following: y.
The installer provides information about the installation and configuration.
Review the information on each page and press Enter to continue.
At the system names prompt, enter the names of the systems on which you
want to install the VCS One Policy Master. Separate each name with a space.
Do not enter fully-qualified domain names or IP addresses. For example,
enter the following: sys1 sys2
Note: If you install the Policy Master on a single system, you only need to
enter one system name.
If you install the Policy Master on a single system, you see a prompt.
Do one of the following:
If you install the Policy
Master on multiple systems
If you install the Policy
Master on a single system
Installing and configuring the VCS One Policy Master
.
Go to the next section, "Specifying whether to install
Storage Foundation."
At the single node confirmation prompt, enter y.
Then go to the next section,
install Storage Foundation."
Installing the Policy Master
"Specifying whether to
41