Symantec XGS-4728F Installation Manual page 198

198 Response file variables
Table E-1 Response file variable definitions (continued)
Variable
$CPI::CFG{VCSONECD_CREDPKG} 1 dimen
$CPI::CFG{VCSONECD_DEPLOYM
ENTCREDPKG}
$CPI::CFG{VCSONECD_CREDENTI
AL}
$CPI::CFG{VCSONECD_SSLLIBPA
TH}
$CPI::CFG{VCSONEPM}{VCSONEP
M_PM_USESOLARISMPATH}
$CPI::CFG{VCSONEPM_CLEANUP
STORAGE}
$CPI::CFG{VCSONEPM_CLUSTERI
D}
$CPI::CFG{VCSONEPM_PMDB_DG
}
$CPI::CFG{VCSONEPM_PMDB_FS} 1 dimen
$CPI::CFG{VCSONEPM}{VCSONEP
M_PM_MPATHCOMMAND}
$CPI::CFG{VCSONEPM__PMDB_M
OUNT}
$CPI::CFG{VCSONEPM_PMDB_VO
LUME}
Dimension/ Definition
Type
Required. Determines if the product is
scalar installed using credential packages. The
values are Y (yes) and N (no).
1 dimen Optional. Determines if the product is
scalar installed using the deployment
credential package. The values are Y
(yes) and N (no).
2 dimen Required. Defines the location of the
scalar credential package. The path can be
absolute or relative to the response file
location. If you are using credential
packages for the configuration, you
must set this variable.
1 dimen Optional. Defines the location of the
scalar SSL libraries. If agents will use SSL, you
must set this variable.
1 dimen Optional. Defines whether to use the
scalar multipathing functionality of the
Solaris operating system daemon.
1 dimen Required. Defines whether the storage
scalar needs to be cleaned up.
1 dimen Required. Must be an integer between 0
scalar and 65535 that uniquely identifies the
Policy Master cluster.
1 dimen Optional. Defines the disk group name.
scalar
Required. Defines the file system type.
scalar If shared storage is not used, local-dir is
used.
1 dimen Optional. Defines the absolute path for
scalar in.mpathd in Solaris.
1 dimen Required. Defines the mount point for
scalar the configuration data.
1 dimen Optional. Defines the volume name.
scalar