Upgrade Scenario Details; Performing A Simplified Upgrade And Importing Two New Systems; Installing The Vcs One 5.0 Policy Master On Two New Systems - Symantec XGS-4728F Installation Manual

Upgrade scenario details

This section provides instructions for each of the upgrade scenarios.
For information about the different scenarios, see:
on page 136.

Performing a simplified upgrade and importing two new systems

Use this upgrade scenario for a test environment or production environment. If
the VCS One 5.0 Policy Master upgrade fails, you can roll your configuration
back to VCS One 2.0.1.
This scenario has no verification phase, and requires you to import two new
systems. This upgrade scenario has the shortest down time, and the fewest
steps.
Figure B-1 Performing a simplified upgrade and importing two new systems

Installing the VCS One 5.0 Policy Master on two new systems

Follow the instructions in this section to install the Policy Master on two new
systems in the Policy Master cluster. When the installation is complete, the new
VCS One 5.0 systems (Node3 and Node4) replace the previous 2.0.1 systems
(Node1 and Node2).
To install the VCS One 5.0 Policy Master on two new systems
1 Check that Node3 and Node4 are running an operating system that VCS One
5.0 supports. Do one of the following:
Sample Policy Master upgrade scenarios
Upgrade scenario details
"Upgrade scenario
137
overview"