Reattaching Existing Clients To The Policy Master - Symantec XGS-4728F Installation Manual

134 Reinstalling the Policy Master

Reattaching existing clients to the Policy Master

Reattaching existing clients to the Policy Master
If you reinstall the Policy Master, you need to reattach existing VCS One clients
to the Policy Master.
To reattach existing clients to the Policy Master
1 Back up the VCS One database configuration:
/opt/VRTSvcsone/bin/haconf -dbtoxml backup_dir
2 Back up the VxSS configuration on all Policy Master systems:
/opt/VRTSvcsone/bin/haadmin -backup -vss backup_dir
3 To uninstall the Policy Master, see
software" on page 128.
4 To re-install the Policy Master, follow the procedure in
One Policy Master" on page 36.
5 Freeze the Policy Master service group (PMSG):
/opt/VRTSvcsone/bin/haadmin -freeze
6 Kill the process vcsoneatd.
/opt/VRTSvcsone/bin/pkill -9 vcsoneatd.bin
7 Restore the VxSS configuration on all Policy Master systems:
/opt/VRTSvcsone/bin/haadmin -restore -vss backup_dir
8 Restart the vcsoneatd process on all Policy Master systems:
/opt/VRTSvcsone/bin/vcsoneatd
9 Unfreeze the PMSG:
/opt/VRTSvcsone/bin/haadmin -unfreeze
10 Stop the Policy Master:
/opt/VRTSvcsone/hastop -pm
11 Restore the VCS One configuration:
/opt/VRTSvcsone/bin/haconf -loaddb -force backup_dir
12 Start the Policy Master:
/opt/VRTSvcsone/bin/hastart -pm
13 Execute haat setuptrust on each Policy Master system.
/opt/VRTSvcsone/bin/haat setuptrust -b virtual IP address for
the broker port -s low -j client
14 Stop the web server:
/opt/VRTSvcsone/bin/hastop -web
15 Restart the web server:
/opt/VRTSvcsone/bin/hastart -web
"Uninstalling Policy Master server
"Installing the VCS