Installing The Vcs One Policy Master With Netapp - Symantec XGS-4728F Installation Manual

Installing the VCS One Policy Master with NetApp

This section provides sample output of the output from a VCS One Policy Master
installation with NetApp on Linux. Use this example for reference only. The
output for each operating system version and installation environment differs
slightly.
Starting the installer
This section provides a brief overview of the installation procedure.
See
detailed instructions.
To install the VCS One Policy Master with NetApp
1
2
Reading the copyright information
Copyright (c) 2009 Symantec Corporation. All rights reserved.
Symantec, the Symantec Logo are trademarks or registered trademarks
of Symantec Corporation or its affiliates in the U.S. and other
countries. Other names may be trademarks of their respective owners.
The Licensed Software and Documentation are deemed to be "commercial
computer software" and "commercial computer software documentation"
as defined in FAR Sections 12.212 and DFARS Section 227.7202.
Logs for installer are being created in /var/tmp/installer-UUfIaK
Selecting a task
Symantec Product
===================================================================
Symantec Licensing Utilities (VRTSvlic package) are not installed
due to which products and licenses are not discovered. Please use
the menu below to continue.
Task Menu:
I) Install/Upgrade a Product
L) License a Product
Chapter 2, "Installing and configuring the VCS One Policy Master"
Mount the product disc.
Invoke the installer. Enter the following:
./installer
Installation Program
Veritas Cluster Server One 5.0.0 by Symantec
Installing the VCS One Policy Master with NetApp
Version Installed
C) Configure an Installed Product
P) Perform a Pre-Installation Check
Sample installation output
for
Licensed
175