Mounting The Product Disc Manually On Solaris; Mounting The Product Disc Manually On Linux; Mounting The Product Disc On Aix; Mounting The Product Disc On Hp-Ux - Symantec XGS-4728F Installation Manual

Mounting the product disc manually on Solaris

If Solaris volume management software is running on your system, the software
disc automatically mounts as /cdrom/cdrom0.
If Solaris volume management software is not available to mount the product
disc, you must mount it manually.
To mount the product disc manually on Solaris
1 Log on and mount the product disc.
2 Insert the disc and enter the following:
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0
where c0t6d0s2 is the default address for the disc drive.

Mounting the product disc manually on Linux

The disc is automatically mounted. If the disc does not automatically mount, you
must mount it manually.
To mount the product disc manually on Linux
1 Log on and mount the product disc. See
"Logging on and mounting the product
2 Insert the disc and enter the following:
# mount -o ro /dev/cdrom /mnt/cdrom

Mounting the product disc on AIX

Mount the disc by determining the device access name of the DVD drive. The
format for the device access name is cdx, where x is the device number.
To mount the product disc on AIX
1 Log on and mount the product disc. See
"Logging on and mounting the product
2 Insert the disc and enter the following:
# mkdir -p /cdrom
# mount -V cdrfs -o ro /dev/cdx /cdrom

Mounting the product disc on HP-UX

To mount the product disc on HP-UX
1 Log on and mount the product disc. See
"Logging on and mounting the product
Getting ready to install VCS One
Running installation prechecks
disc" on page 22.
disc" on page 22.
disc" on page 22.
23