Network Setting - Kyocera FS-1018MFP Advanced Operation Manual

Printer Settings
TCP/IP Setting
3-6
5 To use AppleTalk, select On and
press [Enter].
A Completed message displays
and the Network Setting screen
returns.
This setting should be set to On when the machine is connected to a
Windows network, for example using TCP/IP.
1 Refer to steps 1 through 3 of AppleTalk Setting to access the Network
Setting screen.
NOTE:
If you are performing this procedure immediately after setting up
AppleTalk, the Network Setting screen will be displayed.
2
Press or to select TCP/IP
Setting and press [Enter].
The TCP/IP Setting screen
displays.
3
Press or to select TCP/IP
and press [Enter].
4
To use TCP/IP, select On and
press [Enter].
A Completed message displays
and the TCP/IP Setting screen
returns.
AppleTalk Set.:
* Off
*
On
Cancel

Network Setting:

TCP/IP Setting:
Back Back
* *
TCP/IP AppleTalk Set.
TCP/IP Setting DHCP
Exit Exit
TCP/IP Setting:
Back
*
TCP/IP
DHCP
Exit
TCP/IP Setting:
Off
*
* On
Cancel
ADVANCED OPERATION GUIDE