Kyocera FS-1018MFP Advanced Operation Manual page 151

Access Procedure
ADVANCED OPERATION GUIDE
To access COMMAND CENTER using a web browser:
1
Run the web browser.
2
In Address or Location, enter the IP Address as the URL, e.g. http://
10.183.51.33/.
The home page displays basic information about the machine and
COMMAND CENTER. The current machine status and Operation Panel
settings also display.
3
Select a category from the navigation bar on the left to view and set values
for that category.
NOTE:
If COMMAND CENTER Admin password has been set, you will
be prompted to enter a User Name and Password when accessing any of
the screens other than the home page. If no Admin password has been
set, access to all other pages is unrestricted. The administrator password
may be defined on the Basic page. If prompted to enter User Name and
Password, any value may be entered for User Name (including leaving it
blank). For Password, enter COMMAND CENTER Admin password.
Using COMMAND CENTER
6-3