Kyocera FS-1018MFP Advanced Operation Manual page 157

Basic > Security: Device Page
Basic > Network Page
ADVANCED OPERATION GUIDE
COMMAND CENTER provides the ability to restrict access to the
Operation Panel.
COMMAND CENTER provides the ability to restrict certain types of access
to the Operation Panel by selecting one of the available settings: Lock,
Partial Lock, or Unlock.
Item
Lock Prohibits use of the System Menu/Counter key on the
Operation Panel, and prohibits canceling of jobs from
the Status Menu.
Partial Lock Prohibits use of the System Menu/Counter key on the
Operation Panel.
Unlock There are no restrictions applied to the Operation
Panel.
NOTE:
Network access to the machine can be restricted using IP
address designations and/or SNMP settings.
Network access to the device can be restricted to allow only specific
network addresses. See IP Filter settings.
The SNMP Read and Write Community settings function as passwords
that control read and write access to the device via SNMP. See SNMP
settings.
This page allows you to select settings that are required for network
printing and sending e-mail.
For more information, refer to Advanced > Protocols: TCP/IP: General on
page 6-17.
NOTE:
Always restart the machine after changing network settings in
order to correctly register the new settings in the machine. Refer to Basic
> Reset Page on page 6-11.
Item
Host Name Specifies a name for the printing system network
component. This name is also used as the NetBEUI
Printer Name and the SNMP sysName object.
Using COMMAND CENTER
Description
Description
6-9