Kyocera FS-1018MFP Advanced Operation Manual page 170

Using COMMAND CENTER
6-22
Item
sysLocation The MIB-II sysLocation object, usually the location
information of the printing system.
Authenticati Check On to enable or Off to disable the MIB-II
on Traps EnableAuthenTrap object. If enabled, an SNMP trap is
generated when an attempt to read or write is made
using an incorrect community name. The trap is sent
to the configured trap address.
Trap The SNMP trap community name to be used when the
Community printing system generates a trap.
Trap IP The IP Address which will receive the trap.
Address
Selected Select the events which will cause a trap to be
Errors generated including Add Paper, Low Toner, Add Toner,
Cover Open, Paper Jam, and All Other Errors.
Description
ADVANCED OPERATION GUIDE