Default Gateway Setting - Kyocera FS-1018MFP Advanced Operation Manual

Subnet Mask Setting

Default Gateway Setting

ADVANCED OPERATION GUIDE
Specifies the Subnet Mask configured on the printing system network
component. If the printing system does not automatically assign a usable
default value and the first number in the IP Address is from 192 to 254, then
use 255.255.255.0 as the Subnet Mask.
Use the following procedure to register the Subnet Mask address.
NOTE:
If you are not sure of the appropriate Subnet Mask address,
contact your Network Administrator.
1
Access the TCP/IP Settings screen.
2
Press or to select Subnet
Mask and press [Enter].
The Subnet Mask screen
displays.
3
Enter the Subnet Mask address using the same procedure used for the IP
Address in steps 3 through 5 of IP Address Setting.
Use the following procedure to register the Default Gateway address. If
you are not sure of the appropriate Default Gateway address, contact your
Network Administrator.
1
Access the TCP/IP Setting screen.
2
Press or to select Default
Gateway and press [Enter].
The Default Gateway screen
displays.
3 Enter the Default Gateway address using the same procedure used for the
IP Address in steps 3 through 5 of IP Address Setting.
Printer Settings
TCP/IP Setting:
DHCP
IP Address
Subnet Mask
Exit
TCP/IP Setting:
* IP Address
Subnet Mask
Default Gateway
Exit
3-9