Message Interface - Weidmuller WI-GTWY-9 User Manual

WI-GTWY-9-xxx Wireless Gateway V1.18
1) Radio Configuration
To complete the configuration, the I/O that has now been transferred to the radio interface must
be mapped over the radio network. The analog input from the slave is mapped to an analog
output at a remote WI-I/O 9-x-1, the 8 x digital output at the Profibus slave will be activated in
this example via appropriate mapping from 8 x digital input at a remote WI-I/O 9-x-4 (see
below).

4.11.5 Message Interface

99