Loading From A Wi-Gtwy-9-Xxx - Weidmuller WI-GTWY-9 User Manual

WI-GTWY-9-xxx Wireless Gateway V1.18

4.3.1 Loading from a WI-GTWY-9-xxx

If you load a configuration from a WI-GTWY-9-xxx into a "blank" or new project, then the
program will not be able to display the mappings from remote modules (as the program does not
know what the remote modules are). You will get a warning message like this:
If you open the archived project first, and load into the archived project, then all mappings will
display as normal - any mappings to/from the WI-GTWY-9-xxx will be over-written on the PC
display by the loading process.
If you are unable to load into the archived project, then mappings to remote modules will be
displayed, but mappings from remote inputs will be shown as "Unknown Mappings".
If you also load the configurations from the other remote modules in the system, then these
unknown mappings will disappear as the program can determine where the remote inputs are.
Alternately, you can select "Link Mapping" and manually enter the remote inputs.
50