Weidmuller WI-GTWY-9 User Manual page 3

WI-GTWY-9-xxx Wireless Gateway
FCC Notice:
This user's manual is for the WI-GTWY-9-xxx
radio telemetry module. This device complies with Part 15.247 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may cause
undesired operation.
This device must be operated as supplied by Weidmuller, Inc. Any changes or modifications
made to the device without the written consent of Weidmuller, Inc. May void the user's authority
to operate the device.
End user products that have this device embedded must be supplied with non-standard antenna
connectors, and antennas available from vendors specified by Weidmuller, Inc.. Please contact
for end user antenna and connector recommendations.
Notices:
Safety
Exposure to RF energy is an important safety consideration. The FCC has adopted a safety
standard for human exposure to radio frequency electromagnetic energy emitted by FCC
regulated equipment as a result of its actions in Docket 93-62 and OET Bulletin 65 Edition 97-
01.
CAUTION:
To comply with FCC RF Exposure requirements in section 1.1310 of the FCC Rules, antennas
used with this device must be installed to provide a separation distance of at least 20 cm from all
persons to satisfy RF exposure compliance.
DO NOT:
• operate the transmitter when someone is within 20 cm of the antenna
• operate the transmitter unless all RF connectors are secure and any open connectors are
properly terminated.
• operate the equipment near electrical blasting caps or in an explosive atmosphere
All equipment must be properly grounded for safe operations. All equipment should be serviced
only by a qualified technician.
WI-I/O 9-x Wireless I/O Module
User Manual V1.18
3