Retry Limit - Weidmuller WI-GTWY-9 User Manual

WI-GTWY-9-xxx Wireless Gateway
Tqui
The quiet time is the time a modulator needs after recognizing a send frame to switch from send
to receive.
0 t_bit <= Tqui <= MIN(31 t_bit, Min. Tsdr - 1)
Gap Factor
The Gap Factor determines how many token rounds occur before a new active node (master) can
be added to the token ring.
1 <= Gap Factor <= 100

Retry Limit

The Retry Limits determines the number of attempts (repeated message frames) allowed to
access a node.
1 <= Retry Limit <= 15
HSA
All active nodes (masters) scan the network continuously up to the HSA (highest station
address). HSA must be set at minimum to the highest Profibus address (master or slave)
connected to the network.
0 <= HSA <= 126
Delta_Ttr
V1.18
95