WI-GTWY-9-xxx Wireless Gateway
should now see "Type 'm' for menu......" press "m" and a Configuration Menu will
appear.
5. From this menu type the letter corresponding to
"Initialize and Enter Debug Menu" on the
menu. (It may be different for some versions).
This will then display a "Debug Menu"
6. From this menu type the letter corresponding to
"Enable Comms Logging". (Again it may be
different on some versions).
7. Now click on "Stop Terminal" and then "Start
Comms" and select whether you wish to filter current system address. "Yes" for current
system address only or "No" for all System addresses.
8. Tick the "Time stamps" option and then select "Log to File" and type in the name of the
log file.
9. From now on everything
that is received will be
logged to this file with a
time stamp.
10. The data frames can be
decoded by selecting a
message and then
viewing the panel below
the Terminal windows.
(See Below). You can
see the System address,
Message type, from and
to addresses as well as
the data value, which
can be viewed in a
number of different
formats. I.e Hex, Dec, Analog and Digital.
158
V1.18